Ask The Experts Looking for oxygen sensors for your medical equipment? Discover our range HERE

LLHP Range of Liquid Level Switches

The LLHP range of liquid level switches are a drop in replacement for the OLM80 sensors:

OLM80U0PS2D, OLM80U0PS4D, OLM80U1PS4DM, OLM80U1PS4M

 
The LLHP range of liquid level switches use the same operating principle and housings. All thread sizes and other critical dimensions remain identical.

The LLHP range offer larger mounting threads and robust stainless steel housings that can survive in aggressive environments.

The LLHP range of liquid level switches offer larger mounting threads and robust stainless steel housings that can survive in aggressive environments.

The microcontroller based sensor is solid state, incorporating an infra-red LED and phototransistor which are optically coupled by the tip when the sensor is in air. When the sensing tip is immersed in liquid, the infra-red light escapes making the output change state. The sensor can detect the presence or absence of almost any liquid type; oil or water based. It is insensitive to ambient light and is not affected by foam when in air or by small bubbles when in liquid.

A range of N and P type output configurations can sink or source up to 100mA at a supply voltage range from 4.5 to 15.4 Vdc or 800mA at a supply voltage range from 10 to 45Vdc, all of which can be configured to output a high or low signal in either a wet or dry state.

The LLHP range of liquid level switches combine a robust stainless steel housing with a chemically resistant Polysulfone or Trogamid sensing tip and a selection of termination options. With large threads suitable for external mounting and for use in two operating temperature ranges; Standard (-25 to 80°C) or Extended (-40 to 125°C).

Downloads

Ask the expertRequest A Quote

Part Numbering Guide

Replacement Sensor for

OLM80U0PS2D
OLM80U0PS4D
OLM80U1PS4DM
OLM80U1PS4M

Downloads

Sample/Quote Request

  • This field is for validation purposes and should be left unchanged.