Ask The Experts Looking for oxygen sensors for your medical equipment? Discover our range HERE

Optomax Digital Range of Liquid Level Switches

The Optomax digital range of liquid level switches are a drop in replacement for the following OLP01 & OLT01 sensors:

OLP01B0K4, OLP01T0F3, OLP01T0F4, OLP01T0K3, OLP01T1F3, OLP01T1F4, OLP01T1F4-134, OLP01T1K3, OLP01T1K3-240, OLP01T1K4, OLP01T1L3-032, OLT01T0F3, OLT01T0K3, OLT01T1F3, OLT01T1K3

The Optomax digital range of liquid level switches use the same operating principle and housings. All thread sizes and other critical dimensions remain identical.

SST’s digital liquid level switches are ideal for applications with restricted space that require a miniature, low power and low cost sensing solution.

The microcontroller based sensor is solid state, incorporating an infra-red LED and phototransistor which are optically coupled by the tip when the sensor is in air. When the sensing tip is immersed in liquid, the infra-red light from the Optomax Digital sensor escapes making the output change state. The sensor can detect the presence or absence of almost any liquid type; oil or water based. It is insensitive to ambient light and is not affected by foam when in air or by small bubbles when in liquid.

The TTL compatible push-pull output can sink and source up to 100mA at a supply voltage range of 4.5 to 15.4Vdc and can be configured to output a high or low signal when in either a wet or dry state. A fail-safe PWM option is also available with a supply voltage range of 4.5 to 5.5Vdc.

With housing options for internal or external sensor mounting and for use in two operating temperature ranges; Standard (-25 to 80°C) or Extended (-40 to 125°C).

Available in two chemically resistant housing materials, Polysulfone, the standard choice for most applications or Trogamid, which is typically used in food and beverage applications although these liquid level switches can be used in other applications.


Ask the expertRequest A Quote

Part Numbering Guide

Replacement Sensor for



Sample/Quote Request

  • This field is for validation purposes and should be left unchanged.